Biological Production of Copper Sulfide Concentrate from Flotation Tailings and Low Grade Ore

Abstract

Flotation tailings are hazardous due to physical and chemical instability and are currently considered one of the main pollution concerns of mining industry. Most of these tailings are fine-grained residues with low copper content (0.1-0.8%) and include toxic compounds, such as heavy metals, arsenic, and flotation reagents, among others. Another hazard is the generation of acid mine drainage (AMD) due to biological oxidation of tailings. On the other hand, low-grade ore is challenging the mining industry to commercially produce copper.The main objective of this work was to assess the use of flotation tailings and low-grade ore to produce a biologically-produced copper sulfide, as a product for further pyrometallurgical or fine chemistry processing. Low-grade ore and flotation tailings were first agglomerated at different proportions and leaching tests were performed in 1m columns, using either industrial or synthetic raffinate solution. Then, the PLS solution obtained from the column tests was subjected to selective precipitation of copper by using biogenic hydrogen sulfide (H2S) generated by a mixed culture of neutrophilic sulfate reducing bacteria (SRB), enriched from sediments of Caracarani river (located at 4,600 m over sea level in northern Chile).Over 91% of the copper soluble present in the PLS was recovered as copper sulfide in 28 days, while ferrous iron, other metals and arsenic remained in solution. Analysis performed by XRD confirmed the presence of copper in the precipitate (58% as covellite). This work demonstrates the possibility to apply bioleaching and bio-precipitation technologies to treat tailings and low-grade copper ore to produce a high quality copper sulfide.