Bioleaching of high pyrite carbon-rich sphalerite preflotation tailings

Abstract

In this work, zinc extraction was investigated using bioleaching process. The used samples were carbon-rich preflotation tailings prepared from a lead–zinc mineral processing plant, located in Yazd province, Iran. Two samples were obtained with high amount of pyrite, while the first sample contained high arsenic (As) substitution in the pyrite crystal lattice, and it was about 4–5 times more than that of the second sample. The organic matter in both samples has presented a signature of poorly crystalline carbon. Bioleaching experiments were designed and carried out by a mixed culture of Acidithiobacillus ferrooxidans, Acidithiobacillus thiooxidans and Leptospirillum ferrooxidans in shake flasks. The results showed that in the optimum point of experiments (pH 1.94–2, pulp density 10 %, without initial Fe+2), about 95 % of Zn would be extracted within 14 days, while with no use of bacteria, merely 35 % of Zn content was dissolved (under the same condition). Because of the characteristics of the prepared samples, the bacterial medium (9K) was removed in the optimum condition of bioleaching tests. Results showed that even in the absence of 9K medium, bacteria had proper growth too, such that more than 93 % of Zn content was extracted. In fact, the same results were achieved in the absence and presence of 9K medium. Comparison of the obtained results in bioleaching tests under the optimum condition indicated that Zn extraction was the same for both high and low As samples, while Fe extraction from low As content sample was nearly 4 times higher than that of the other sample.