Abstract
This paper reports a simple electrodeposition technology that enables rapid production of large-area polymer nanocomposites with layered structures that mimic the nacreous layer of mollusk shells. Uniform, electrostatically stabilized gibbsite nanoplatelets with high aspect ratio are preferentially oriented parallel to the electrode surface when an external direct current electric field is applied. The electroplated ceramic films have uniform thickness, and the thickness can be controlled by adjusting the nanoplatelet concentration of the electroplating baths. Homogeneous, optically transparent nanocomposites are obtained when the interstitials between the aligned nanosheets are infiltrated with polymer. The resulting ceramic−polymer nanocomposites exhibit four-times higher tensile strength and nearly 1 order of magnitude higher modulus than pure polymer films. The covalent linkage between the nanoplatelets and the polymer matrix plays an important role in determining the mechanical properties of these bi...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.