Biogas dry reforming over Ni-Al catalyst: Suppression of carbon deposition by catalyst preparation and activation

Abstract

Biogas dry reforming is as an alternative renewable route for the hydrogen production. However, the major drawback of this process is the catalyst deactivation by carbon deposition and sintering. In this work, Ni-Al catalysts were studied aiming to suppress the carbon deposition in the dry reforming of biogas. The catalysts were prepared by coprecipitation and evaluated the washing step. The reactions were carried out with unreduced and reduced catalysts in a fixed bed tubular reactor using a synthetic biogas (60% CH4 and 40% CO2). The washing and activation steps influenced the characteristics of the catalysts and the catalytic properties in the biogas reforming. The unwashed sample resulted in an oxide containing potassium nickelate with high basicity and low surface area. Both washed samples, reduced and unreduced, showed a high amount of carbon formation, whereas no carbon formation was observed in the unwashed samples for the reactions in the temperature range of 500–750 °C. The unwashed and unreduced sample was the only one that maintained the activity during all the reaction time at 700 °C (40% CH4 conversion and 75% CO2 conversion), low coke amount and no evidence of sintering, which was confirmed by XRD, TPO, and SEM analyses. The carbon suppression was related to the nickelate phase and to the Ni carbide formation in the unwashed and unreduced catalyst. In summary, the carbon deposition in biogas dry reforming was completely controlled between 600 and 750 °C using the unwashed and unreduced Ni-Al catalyst.