Abstract
One of the hurdles of renewable energy production from photosynthetic microorganisms is separating the biomass from water in cultures. Bioflocculation with filamentous fungus Aspergillus niger, an alternative low-cost method used for such separation, was studied with four cyanobacteria. Cocultures with Spirulina maxima and Synechococcus subsalsus resulted in bioflocculation efficiencies up to 94%, while with Anabaena variabilis and Anabaena siamensis bioflocculation did not occur. S. subsalsus was selected to evaluate the effect of cyanobacterial initial concentration, fungal:cyanobacterial ratio, carbon supplementation, and pH on biomass densification. Bioflocculation efficiencies up to 98% in 48 h were obtained with fungal:cyanobacterial ratio 1:5 and carbon supplementation. Despite the lower efficiency (54%), the highest concentration factor of S. subsalsus suspension (62.8 – from 0.9 to 56.5 g/L) was obtained with ratio 1:5 without supplementation. This result was attributed to the smaller pellet diameter (2.5 mm) and indicated that lower pellet growth is better for biomass densification.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
