Abstract
The aim of this study was to analyze the interaction of surface free energy and roughness characteristics of different pyrolytic carbon heart valves with three bacterial species on biofilm formation. Three pyrolytic carbon heart valves (St Jude Medical [St Jude Medical Inc, Minneapolis, Minn], Sulzer Carbomedics [CarboMedics Inc, Austin, Tex], and MedicalCV [Medical Incorporated, Inver Grove Heights, Minn]) were tested. Roughness was measured by interferential microscopy and surface free energy by contact angle technique. To obtain a biofilm, prostheses were inserted into a bioreactor with Staphylococcus aureus P209, Staphylococcus epidermidis RP62A, or Pseudomonas aeruginosa PAO1. Adhesion was quantified by counting sessile bacteria. Morphologic characteristics of biofilms were evaluated with scanning electron microscopy. Roughness analysis revealed significant differences between the MedicalCV (35.18 +/- 4.43 nm) valve and St Jude Medical (11.03 +/- 3.11 nm; P < .0001) and Sulzer Carbomedics (8.80 +/- 1.10 nm; P < .0001) valves. Analysis of surface free energy revealed a higher level for the MedicalCV valve (41.03 mJ x m(-2)) than for both the Sulzer Carbomedics (38.93 mJ x m(-2)) and St Jude Medical (31.51 mJ . m(-2)) models. These results showed a correlation between surface free energy and bacterial adhesion for S epidermidis and P aeruginosa species. Regardless of the support, we observed significant adhesion differences for the three bacterial species. S aureus was the most adherent species, S epidermidis was the least, and P aeruginosa was intermediate. Our results suggest that adhesion of S epidermidis and P aeruginosa are dependent on pyrolytic carbon surface free energy and roughness, although S aureus adhesion appears to be independent of these factors. Improvement of pyrolytic carbon physicochemical properties thus could lead to a reduction in valvular prosthetic infections.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Journal of Thoracic and Cardiovascular Surgery
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
