Bioethanol production from pretreated Miscanthus floridulus biomass by simultaneous saccharification and fermentation

Abstract

The production of ethanol from the fast-growing perennial C4 grass Miscanthus floridulus by simultaneous saccharification and fermentation (SSF) was investigated. M. floridulus biomass was composed of 36.3% glucan, 22.8% hemicellulose, and 21.3% lignin (based on dried mass). Prior to SSF, harvested stems of M. floridulus were pretreated separately by alkali treatment at room temperature, alkali treatment at 90 °C, steam explosion, and acid-catalyzed steam explosion. The delignification rates were determined to be 73.7%, 61.5%, 42.7%, and 63.5%, respectively, by these four methods, and the hemicellulose removal rates were 51.5%, 85.1%, 70.5%, and 97.3%, respectively. SSF of residual solids after various pretreatments was performed with dried yeast (Saccharomyces cerevisiae) and cellulases (Accellerase 1000) by using 10% water-insoluble solids (WIS) of the pretreated M. floridulus as the substrate. The ethanol yields from 72-h SSF of M. floridulus biomass after these pretreatments were 48.9 ± 3.5, 78.4 ± 1.0, 46.4 ± 0.1, and 69.0 ± 0.1% (w/w), respectively, while the ethanol concentrations after 72-h SSF were determined to be 15.4 ± 1.1, 27.5 ± 0.3, 13.9 ± 0.1, and 30.8 ± 0.1 g/L, respectively. Overall, the highest amount of ethanol (0.124 g/g-dried raw material) was generated from dried raw material of M. floridulus after alkaline pretreatment at 90 °C. The acid-catalyzed steam explosion pretreatment also resulted in a high ethanol yield (0.122 g/g-dried raw material). Pretreatment resulting in high lignin and hemicellulose removal rates could make biomass more accessible to enzyme hydrolysis and lead to higher ethanol production.