Abstract

This study aimed to select thermotolerant yeast for bioethanol production from cellulose-rich corncob (CRC) residue. An effective yeast strain was identified as Saccharomyces cerevisiae TC-5. Bioethanol production from CRC residue via separate hydrolysis and fermentation (SHF), simultaneous saccharification and fermentation (SSF), and prehydrolysis-SSF (pre-SSF) using this strain were examined at 35–42 °C compared with the use of commercial S. cerevisiae. Temperatures up to 40 °C did not affect ethanol production by TC-5. The ethanol concentration obtained via the commercial S. cerevisiae decreased with increasing temperatures. The highest bioethanol concentrations obtained via SHF, SSF, and pre-SSF at 35–40 °C of strain TC-5 were not significantly different (20.13–21.64 g/L). The SSF process, with the highest ethanol productivity (0.291 g/L/h), was chosen to study the effect of solid loading at 40 °C. A CRC level of 12.5% (w/v) via fed-batch SSF resulted in the highest ethanol concentrations of 38.23 g/L. Thereafter, bioethanol production via fed-batch SSF with 12.5% (w/v) CRC was performed in 5-L bioreactor. The maximum ethanol concentration and ethanol productivity values were 31.96 g/L and 0.222 g/L/h, respectively. The thermotolerant S. cerevisiae TC-5 is promising yeast for bioethanol production under elevated temperatures via SSF and the use of second-generation substrates.

Highlights

  • The demand for petroleum-based fuels for industry, agriculture, transportation, and private sectors is sharply increasing

  • The CRC residue was a solid waste obtained from corncob-XO production

  • CRC hydrolysate was further applied as a carbon source for bioethanol production by the thermotolerant yeast via separate hydrolysis and fermentation (SHF)

Read more

Summary

Introduction

The demand for petroleum-based fuels for industry, agriculture, transportation, and private sectors is sharply increasing. Bioethanol is a liquid biofuel produced from biomass by microbial fermentation of various substrates, such as sugar-based substrate, starchy biomass, and lignocellulosic biomass [1,2,3]. Lignocellulosic biomass, a renewable substrate, is the cheapest and most sustainable substrate for bioethanol production [4,5]. Cellulose-rich corncob (CRC) residue is a solid waste obtained from corncobxylooligosaccharides (corncob-XO) production. During XO production, most of the xylan in KOH-treated corncob is hydrolyzed by cellulase-free endo-xylanase, whereas the cellulose remains. The CRC residue contains a relatively high cellulose content in the range of 74–80% (w/w), with 10–13% (w/w) hemicellulose and 2–6% (w/w) lignin, making it an attractive substrate for fermentable sugar and bioethanol production [6]

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call