Biodiesel production from mixtures of canola oil and used cooking oil

Abstract

Abstract Used cooking oil (UCO) was mixed with canola oil at various ratios in order to make use of used cooking oil for production of biodiesel and also lower the cost of biodiesel production. Methyl and ethyl esters were prepared by means of KOH-catalyzed transesterification from the mixtures of both the oils. Water content, acid value and viscosity of most esters met ASTM standard except for ethyl esters prepared from used cooking oil. Canola oil content of at least 60% in the used cooking oil/canola oil feedstock is required in order to produce ethyl ester satisfying ASTM specifications. Although ethanolysis was proved to be more challenging, ethyl esters showed reduced crystallization temperature (−45.0 to −54.4 °C) as compared to methyl esters (−35.3 to −43.0 °C). A somewhat better low-temperature property of ester was observed at higher used cooking oil to canola oil ratio in spite of similar fatty acid compositions of both oils.