Abstract
In this study, chitin (Ct), chitosan (Ch) and titanium powder (Ti) were melt-blended with polylactide (PLA) to produce three composites of PLA. The samples were subjected to multiple characterisations, which includes immersion in a phosphate buffer solution (PBS) for ten weeks. The results showed that the three fillers reduced the hydrophobicity of PLA, making the reinforced samples to be more hydrophilic. In addition, the organic reinforced PLA composites became more amorphous while the PLA/Ti samples became more crystalline when compared with unreinforced PLA. The results of the samples’ immersion in PBS showed that the organic reinforced PLA presented a biodegradation profile that would allow for the required gradual transfer of load to the partially healed fractured bone. Except for the chitin reinforced PLA (PLA/Ct) with 16.67 wt. %, all other composites produced using the organic fillers gave a swelling percentage which was less than 17%. However, titanium-reinforced PLA (PLA/Ti) composites were found to continue to swell after ten weeks of the immersion of the samples. Although all the samples formed apatite on their surfaces (except the unreinforced PLA), the biodegradation profile of PLA/Ti was deemed unsuitable as an implant because of the possibility of postoperative palpability.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
