Biodegradation of acid red 3BN dye in sequential batch reactor: parameters and kinetics studies

Abstract

Abstract Textile and dye industries generate wastewater which is considered as highly polluted and carcinogenic. Due to this, treatment of wastewater is required earlier to discharge or recycle. In the present studies, treatment of dye bearing water (DBW) has been explored. The treatment was performed using activated sludge (mixed culture) for aerobic process in sequential batch reactor (SBR). The fill volume (V F) and fill time (t F) variation in the treatment of DBW was taken place. The initial value of dye concentration, chemical oxygen demand (COD), sludge, and hydraulic retention time (HRT) were found to play important role in the treatment. At optimum condition (HRT = 2.5 d), the 86.84% COD reduction of 190 mg/L COD, and 92.33% dye reduction of 339 mg/L dye were achieved. These values are equal to overall 94.85% dye reduction of 500 mg/L, and 93.15% COD reduction of 380 mg/L. As a result, 500 mg/L dye was reduced to 26 mg/L, and 380 mg/L COD was reduced to 25 mg/L. The biodegradation fitted to Monod kinetics, for which kinetics parameter values of specific growth rate constant of biomass µ = 0.0047 h−1, yield coefficient (Y) = 1.059, and substrate utilization rate (q) = 0.0044 h−1 were evaluated at HRT = 2.5 d. The results show, this process can be applied to treat Acid Red 3BN Dye Water (AR3BNDW).