Biochars from chlorine-rich feedstock are low in polychlorinated dioxins, furans and biphenyls

Abstract

Chlorinated aromatic hydrocarbons like polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) and polychlorinated biphenyls (PCB) are omnipresent in the environment due to historic production, use, and (unintended) release. Nowadays, their emission and maximum concentration in environmental compartments is strictly regulated. During biochar production, PCDD/F and PCB may be formed and retained on the solid pyrolysis product. Industrial biochars certified, e.g., under the European Biochar Certificate (EBC), exhibit concentrations that were always well below threshold values for soil application and even animal feed. However, this has not been sufficiently tested for chlorine (Cl) rich organic material such as marine biomass or polyvinyl chloride (PVC) contaminated feedstock. Here, we analyzed PCDD/F and PCB contamination in biochars produced at different temperatures from different biomasses with comparatively high Cl contents in the range from 0.2 % to 3.8 % (w/w, seagrass, two types of saltwater macroalgae, tobacco stalks, and PVC contaminated wood). All of the biochars produced showed PCDD/F and PCB contents well below the applicable threshold values given by the EBC (< 20 ng TEQ kg−1 for PCDD/F and < 2×105 ng kg−1 for PCB). The EBC thresholds were undershot by a minimum of factor 1.5 for PCDD/F (mostly factor 20) and by a minimum of factor 90 for PCB. Between 1 and 27 ppb of feedstock Cl were transformed to Cl bound in PCDD/F and PCB in the biochars. No consistent correlation between biomass Cl contents and contents of PCDD/F and PCB were found but higher Cl contents in the feedstock led to a more diverse PCDD/F congener pattern in the biochars. Pyrolysis of PVC-amended wood resulted in consistently higher contamination of PCDD/F and PCB in the biochars compared to pyrolysis of the other biomasses, potentially due to differences in Cl speciation in the feedstocks i.e., Cl in PVC is already covalently bound to an organic carbon backbone. A high contamination in PCDD/F and PCB in biochar was intentionally triggered by separation of pyrogas and biochar in the reactor at < 300 °C to promote condensation of contaminants on the solid product. Between 20 % and 80 % of feedstock Cl was released via the pyrogas, i.e., neutralization of HCl in burnt pyrogas might be necessary when pyrolyzing Cl-rich feedstock in industrial biochar production. Our results indicate that biochars produced from Cl-rich feedstocks with proper biochar production process control are conform with European certification guidelines for PCDD/F and PCB contamination. The results open the opportunity to exploit and valorize so far non-used marine or otherwise Cl enriched biomasses for the production of biochar and carbon sinks.