Biochar: Carbon Mitigation from the Ground Up

Abstract

As multibillion-dollar projects intended to sequester carbon dioxide (CO2) in deep geologic storage continue to seek financial support, the fertile black soils in the Amazon basin suggest a cheaper, lower-tech route toward the same destination. Scattered patches of dark, charcoal-rich soil known as terra preta (Portuguese for “black earth”) are the inspiration for an international effort to explore how burying biomass-derived charcoal, or “biochar,” could boost soil fertility and transfer a sizeable amount from the atmosphere into safe storage in of CO2 topsoil. Although burial of biochar is just beginning to be tested in long-term, field-scale trials, studies of Amazonian terra preta show that charcoal can lock up carbon in the soil for centuries and improve soil fertility. Charcoal is made by heating wood or other organic material with a limited supply of oxygen (a process termed “pyrolysis”). The products of the pyrolysis process vary by the raw material used, burning time, and temperature, but in principle, volatile hydrocarbons and most of the oxygen and hydrogen in the biomass are burned or driven off, leaving carbon-enriched black solids with a structure that resists chemical and microbial degradation. Christoph Steiner, a research scientist at the University of Georgia, says the difference between charcoal and biochar lies primarily in the end use. “Charcoal is a fuel, and biochar has a nonfuel use that makes carbon sequestration feasible,” he explains. “Otherwise there is no difference between charcoal carbon and biochar carbon.” Charcoal is traditionally made by burning wood in pits or temporary structures, but modern pyrolysis equipment greatly reduces the air pollution associated with this practice. Gases emitted from pyrolysis can be captured to generate valuable products instead of being released as smoke. Some of the by-products can be condensed into “bio-oil,” a liquid that can be upgraded to fuels including biodiesel and synthesis gas. A portion of the noncondensable fraction is burned to heat the pyrolysis chamber, and the rest can provide heat or fuel an electric generator. Pyrolysis equipment now being developed at several public and private institutions typically operate at 350–700°C. In Golden, Colorado, Biochar Engineering Corporation is building portable $50,000 pyrolyzers that researchers will use to produce 1–2 tons of biochar per week. Company CEO Jim Fournier says the firm is planning larger units that could be trucked into position. Biomass is expensive to transport, he says, so pyrolysis units located near the source of the biomass are preferable to larger, centrally located facilities, even when the units reach commercial scale.