Abstract
This research aimed to study the effect of lignin, natural rubber latex (NRL), nanocellulose, and talc on production of biobased foam using cassava starch as matrix. Comparison study on lignin extraction from sugarcane bagasse (SCB) for different types of base (KOH and NaOH), concentration (10 %w/w and 40 %w/w), and temperatures (60 C for 3 h and 120 C for 1 h) was performed. The most suitable isolation condition giving the highest yield of lignin and lowest hemicellulose contamination was 40 %KOH at 120 oC for 1 h. A mechanical method was superior to a chemical method for cellulose size reduction owing to more appropriate size distribution and uniformity of nanocellulose. The most favorable proportion of foam contained 20% nanocellulose, 3% talc, 0.1% NRL, 38.5% water, and 76.9% crosslinked cassava starch. These conditions resulted in favorable flexural strength, modulus, and percentage of elongation, analogous to polystyrene foam. An appropriate amount of added lignin increased the elasticity of biofoam.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
