Abstract
Ethyl tert-butyl ether (ETBE) is a fuel octane enhancer considered as a major bio-fuel in Europe. Blended with gasoline fuels, ETBE improves fuel combustion and reduces toxic hydrocarbon emissions. ETBE industrial synthesis leads to an azeotropic mixture EtOH/ETBE (20/80wt%), which cannot be separated by simple distillation. According to former works, cellulose acetate (CA) membranes were extremely selective with a permeate EtOH content of 100% but their flux was too low for ETBE purification by the pervaporation (PV) membrane process. The affinity of the bio-based polylactide (PLA) for ethanol has also been reported for poly(vinyl pyrrolidone)/PLA blends for this application. In this work, new bio-based membranes were obtained by grafting CA with controlled PLA amounts by a “grafting onto” strategy. The CA-g-PLA copolymers were characterized by ATR-FTIR, 1H NMR, DSC and SAXS. Their membrane properties were investigated in terms of structure-morphology-property relationships for the sorption and pervaporation of the targeted EtOH/ETBE mixture. PLA grafting onto CA strongly improved the flux (×12) while the ethanol permeate content remained in the very high range (C′>90wt%) for ETBE purification by pervaporation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.