Abstract
Abstract In this study, coatings, consisting of hydroxyapatite and titanium oxide bioceramic phases, were produced on Ti6Al4V alloy by plasma electrolytic oxidation for different times in a solution containing calcium acetate and β-calcium glycerophosphate. The phases of anatase, rutile, TCP (Ca3(PO4)2), perovskite-CaTiO3 and hydroxyapatite (HAp, Ca10(PO4)6(OH)2) were detected in the PEO coatings. The crystallinity of these phases was enhanced with increasing treatment time. The friction and wear resistance properties of the PEO coatings in simulated body fluid (SBF) were substantially improved compared to Ti6Al4V alloy. The corrosion resistance of the PEO samples in SBF was determined by an electrochemical method, and found to be significantly improved compared to Ti6Al4V alloy due to the existence of titanium oxide and the calcium phosphate-based phases. The amount of apatite induced at the PEO surface increased with increasing immersion time in SBF at 36.5 °C. According to the SEM images and FTIR results, after soaking in SBF for 14 days, the amount of secondary apatite formed in the coating electrolytically oxidized for 90 min was maximized due to high surface area and high amount of TiO2 and HAp in the coating structure.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
