Abstract
Realizing the efficacy of the liquid-phase exfoliation technique to obtain a greater quantity of graphene, this study demonstrates a cost-effective technique of bio-surfactant-assisted liquid-phase exfoliation of few-layer graphene (FLG) with a low defect ratio. An ultrasonic bath without any toxic chemicals or chemical modification was employed to exfoliate the graphene at room temperature. Several state-of-the-art characterization techniques such as TEM, AFM, XRD UV-Vis, and Raman spectroscopy were used to confirm the presence of the graphene. The dispersion exhibits a typical Tyndall scattering to the red laser beam. After a 7-h sonication of the dispersion, followed by a centrifugation frequency of 500 rpm for half an hour, the graphene concentration was found to be 1.2 mg/mL. The concentration decreases monotonically with an increase in the frequency, as a higher frequency causes sedimentation of the larger flakes or removes the adsorbed surfactant molecules from the graphene structures that collapse the graphene sheets into the graphite. The presence of an amino acid head-group in the surfactant facilitated exfoliation in an aqueous solution at well below the critical micelle concentration (CMC) of the surfactant. The product demonstrates all characteristic features of an FLG system. The TEM and AFM image reveals large-area graphene with a wrinkle-free surface; these morphological properties are confirmed by XRD and Raman spectroscopy. This study suggests that a sonication-induced process with a biocompatible surfactant can produce a cheap, large-surface-area graphene system for a wide range of applications. Moreover, the use of a probe sonicator as an alternative to the bath-type sonicator, together with the demonstrated technique, may reduce the time needed, and leads to a manifold increase in the yield.
Highlights
Graphene is the two-dimensional form of the carbon monolayer of graphite; it was proven to be stable under average room conditions
The persion turned into a black homogenous phase, consisting of large, grey-colored dispersion turned into a black homogenous phase, consisting of large, grey-coloredmacromacroscopic providing a scopic aggregates
Even though the surfactant-based system led to some lems concerning the complete removal of surfactant molecules from the the final product, it problems concerning the complete removal of surfactant molecules from final product, has many advantages, since a aminimal it has many advantages, since minimalamount amountofofsurfactant surfactantisisneeded neededfor forexfoliation
Summary
Graphene is the two-dimensional form of the carbon monolayer of graphite; it was proven to be stable under average room conditions. Micromechanical cleavage is the most efficient method in terms of quality, as it gives monolayer graphene a very large size without any defects, this method has significant limitations in terms of yield and quantity, similar to other novel inventions. For the production of large quantities, a cost-effective and environmentally friendly system is very important. Considering this fact, liquid-phase exfoliation has attracted the attention of many scientists, as it is easy to produce using the available resources; it can be produced using a kitchen blender or ultra-sonication energy [8,9]. Efforts are being made to obtain a cost-effective and environmentally friendly production process that may enable the successful application of graphene in diverse fields
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
