Abstract
Toward sustainability of polymer-matrix composites, this study aimed to prepare and evaluate glass fiber reinforced (GFR) biocomposites of fully bio-based furan resin, and their partial comparison with those from resole phenolic resin used commonly in composite industry. Thus, the bioresin, poly(furfuryl alcohol), PFA, was synthesized using a sulfonic acid catalyst. A furan biocomposite with a woven glass fiber (GF), modified by (3-aminopropyl)-triethoxysilane, and various percentages of talc filler were prepared. The mechanical properties of the GFR composite specimens were studied using three-point bending test, tensile test, and dynamic mechanical thermal analysis. Flexural strength was enhanced from 202 to 240 MPa by employing modified fibers, while using 1, 3 and 5 wt% of talc, it reached to 235, 252 and 228 MPa, respectively. Simultaneous use of the modified fibers and 3 wt% of talc significantly improved the flexural strength up to 327 MPa. The scanning electron microscope images evidently confirmed an increase in fiber-matrix adhesion in bioresins with modified fibers and talc. Thermogravimetric analysis established a promotion of thermal properties as a result of the apparent initial decomposition temperature, which was more obvious for the modified fiber containing biocomposites. Finally, the superiority of the bioresin was proved by comparing it to its petro-based counterpart in acidic, basic, and organic solvents. Thus, in many common uses, the inexpensive sustainable PFA bioresin can be considered as a promising alternative to a non-sustainable phenolic resin originated from petroleum resource.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.