Abstract
To biomimic the spinning process of silkworm or spider, a capillary spinning equipment was applied to spin regenerated silk fibroin (RSF) fibers from RSF aqueous solutions in air. This equipment exhibits a wide processing window for various RSF aqueous solutions. The effects of pH, metal ions, RSF concentration and spinning parameters on the spinnability of the spinning dope and the mechanical properties of the obtained fibers were investigated. As a result, spinning dopes with a pH from 5.2 to 6.9 have good spinnability, especially for the dope with a pH of 6.0 and a Ca 2+ concentration of 0.3 M. The RSF concentration of this dope ranges from 44% to 48%. Under optimized conditions of our dry spinning experiments (L/D, 133; take-up speed, 30 mm/s), the obtained as-spun fiber has a breaking strength of 46 MPa, which can be improved up to 359 MPa after a preliminary post-drawing in 80 vol.% ethanol aqueous solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
