Abstract
Performance evaluation of a ceramic microbial fuel cell (CMFC) by varying organic strength, hydraulic retention time (HRT) and anode electrode surface area (AESA) to treat leachate generated from acidogenesis of kitchen waste (KW) was studied by the central composite design of experiment. The increase in organic loading rate (OLR) positively affected power density (PD) while negatively influencing organic removal and coulombic efficiency (CE). This behavior is possible due to substrate inhibition and the coercive effect of low HRT, i.e., substrate washout, biofilm abrasion, and reduced contact period, while at high HRT, the volatile fatty acid (VFA) degradation improved. Since acetic acid is the final product of long-chain VFAs degradation, a pseudo consumption order for VFAs was obtained: butyric > propionic > acetic. The AESA aided organics removal and PD but had a negligible effect on CE. According to ANOVA, the COD removal was linearly modeled, while PD and CE were quadratic. The validation runs (VR) proved efficient as the highest COD removal was for VR2 (83.7 ± 3.6%), while maximum PD and CE values obtained were 0.224 ± 0.02 W/m3 and 2.62 ± 0.33%, respectively, for VR3, supported by the lower anode potential.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.