Abstract
Polyurethanes are the result of a reaction between an isocyanate and a polyol. The large variety of possible reagents creates many possible polyurethanes to be made, such as soft foams, rigid foams, coatings, and adhesives. This polymer is one of the most produced and consumed polymers in the world with an ever-increasing demand. Despite its usual petrochemical nature, research on bio-based polyurethanes flourishes due to the ease in creating bio-based polyols. This work covers the synthesis of a novel macauba kernel oil polyol by the epoxidation of the oil, followed by a ring-opening reaction of the epoxide with glycerol, used for the preparation of polyurethane foams using different NCO/OH ratios. The FTIR and H1 results confirm the formation of the epoxide and polyol, and the polymers in all NCO/OH ratios were confirmed by FTIR, showing great similarities between the samples, especially PU 1.0 and PU 1.2. Despite the TGs showing close behaviors for the three samples, their DTGs showed great difference between the samples, with PU 1.0 presenting a regular PU DTG profile with three degradation peaks while the other two sample presented five degradation peaks, indicating a higher crosslinking density in them.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
