Abstract
Abstract: A binder for refractory castables is a bonding material that bonds a loose powdery mix, retains its shape after casting and allows the cast shape to set and harden for handling and further processing. A binder also improves sintering, as the castables are not compacted during shaping, causing poor densification and strength. Initially, plastic clay was used as a binder for castables, but soon it was found to have more disadvantages than benefits. Next came the alumina cements with an alumina content below 50 %, but this resulted in degraded hot properties due to low temperature liquid phase formation. The performance of the castables was improved with an increase in the alumina content of the cement. However, the presence of lime continued to be a concern with high temperature uses. Then came the binders without lime, like sol-gel, hydrated alumina, phosphates, etc. Different bonding systems have their own advantages and limitations and are being used as per the requirements of the application site. The present paper reviews the different types of binders available for castables and gives an elaborate idea for their functioning and performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.