Abstract
Lithium-ion capacitors (LICs) are next-generation electrochemical storage devices that combine the benefits of both supercapacitors and lithium-ion batteries. Silicon materials have attracted attention for the development of high-performance LICs owing to their high theoretical capacity and low delithiation potential (∼0.5 V versus Li/Li+). However, sluggish ion diffusion has severely restricted the development of LICs. Herein, a binder-free anode of boron-doped silicon nanowires (B-doped SiNWs) on a copper substrate was reported as an anode for LICs. B-doping could significantly improve the conductivity of the SiNW anode, which could enhance electron/ion transfer in LICs. As expected, the B-doped SiNWs//Li half-cell delivered a higher initial discharge capacity of 454 mAh g−1 with excellent cycle stability (capacity retention of 96% after 100 cycles). Furthermore, the near-lithium reaction plateau of Si endows the LICs with a high voltage window (1.5–4.2 V), and the as-fabricated B-doped SiNWs//AC LIC possesses the maximum energy density value of 155.8 Wh kg−1 at a battery-inaccessible power density of 275 W kg−1. This study provides a new strategy for using Si-based composites to develop high-performance LIC.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.