Abstract
Hydrogen energy has long been recognized as a clean alternative to conventional fossil fuels, which can be applied in a wide range of transportation and power generation applications. The rational design and engineering of high-performance and robust catalysts for hydrogen evolution reaction (HER) shows not a great significance but a challenge for efficient electrochemical water splitting. Herein, a new type of Ni-based Ni-ABDC precursor has been obtained, which leads to the formation of N-doped porous carbon nanomaterials uniformly coated with well-proportioned bimetallic AgNi alloys via a stepwise strategy. To their credit, all samples of AgNi/NC-X are structurally calcined from the pristine AgNi-ABDC-X by tuning the different concentration of AgNO3, which means all of them maintain the vermicelli-like morphology compared with Ni-ABDC. The series of AgNi/NC-X materials can be regarded as effective electrocatalysts for HER both in acidic and alkaline media, but an acid-leaching phenomenon is observed. Among them, the as-prepared AgNi/NC-2 exhibits a low overpotential of 103 mV at the current density of 10 mA cm−2 and decent durability with a high retention rate of 90.9% after 10 h in 1.0 mol L−1 KOH electrolyte. The compelling HER properties of AgNi/NC-2 can be attributed to the synergistic effect between the hierarchical carbon materials, partial N-doping and abundant AgNi alloys. Meanwhile, this study provides a practicable method for the development of efficient HER electrocatalysts for energy applications, which can be conveniently prepared through the reasonable introduction of active components in the crystalline inorganic-organic precursors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have