Abstract
Abstract In the present paper, an improved high-order theory is used for wrinkling analysis of sandwich plates with soft orthotropic core. Third-order plate theory is used for the facesheets and quadratic and cubic functions are assumed for transverse and in-plane displacements of the core, respectively. Continuity conditions for transverse shear stresses at the interfaces as well as the conditions of zero transverse shear stresses on the upper and lower surfaces of the plate are satisfied. The nonlinear Von-Karman type relations are used to obtain strains. Also, the transverse flexibility and transverse normal strain and stress of the orthotropic core are considered. The equations of motion and boundary conditions are derived by principle of minimum potential energy. Analytical solution for static analysis of simply supported sandwich plates under biaxial in-plane compressive loads is presented using Navier's solution. The effect of geometrical parameters of the facesheets and the core and the biaxial loads ratio are studied on the buckling and wrinkling behavior of sandwich plates. Comparison of the present results with the published results in the literature for the special case, confirms the accuracy of the proposed theory. Results showed that the increase in the biaxial load ratio, cause to change the direction of wrinkling wave propagation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
