Biaxial experimental and analytical characterization of a dielectric elastomer

Abstract

Electroactive polymers (EAPs) have emerged as a strong contender for use in low-cost efficient actuators in multiple applications especially related to biomimetic and mobile-assistive devices. Dielectric elastomers (DE), a subcategory of these smart materials, have been of particular interest due to their large achievable deformation and favourable mechanical and electro-mechanical properties. Previous work has been completed to understand the behaviour of these materials; however, their properties require further investigation to properly integrate them into real-world applications. In this study, a biaxial tensile experimental evaluation of 3M™ VHB 4905 and VHB 4910 is presented with the purpose of illustrating the elastomers’ transversely isotropic mechanical behaviours. These tests were applied to both tapes for equibiaxial stretch rates ranging between 0.025 and 0.300 s−1. Subsequently, a dynamic planar biaxial visco-hyperelastic constitutive relationship was derived from a Kelvin–Voigt rheological model and the general Hooke’s law for transversely isotropic materials. The model was then fitted to the experimental data to obtain three general material parameters for either tapes. The model’s ability to predict tensile stress response and internal energy dissipation, with respect to experimental data, is evaluated with good agreement. The model’s ability to predict variations in mechanical behaviour due to changes in kinematic variables is then illustrated for different conditions.