Bevameter pressure-sinkage testing on snow

Abstract

Pressure-sinkage tests for determining vehicle sinkage on soft soils can be done using a bevameter. In this study, pressure-sinkage tests were performed on snow, which, like soil, is a granular material. However, unlike soil, snow layers are inhomogeneous with varying properties. For tracked vehicles, the shape of the track print is rectangular, which is why rectangular plates are often used for pressure-sinkage tests. The aim of this study was to see if smaller circular plate or smaller rectangular plates can be used instead of larger rectangular plates, and to understand the possible limitations of using small plates. Radius for the circular plate was chosen to be equal to the width of the rectangular plate. Three measuring sessions were performed at different locations during different snow conditions using circular pressure plates and rectangular pressure plates of different aspect ratios. The results show that smaller rectangular plates can be used if the width of the plates remains the same, or circular plates can be used if the radius of the circular plate is equal to the width of the rectangular plate. Limitation comes with increasing pressure, which occurs more quickly with larger-area plates, as larger plates sense solid ground more rapidly than smaller plates. To avoid this, snowpack thickness should be a minimum of five times thicker than maximum sinkage.