Best Tourniquet Holding and Strap Pulling Technique.

Abstract

Appropriate strap pressure before tightening-system use is an important aspect of nonelastic, limb tourniquet application. Using different two-handed techniques, the strap of the Generation 7 Combat Application Tourniquet (C-A-T7), Tactical Ratcheting Medical Tourniquet (Tac RMT), Tactical Mechanical Tourniquet (TMT), Parabelt, and Generation 3 SOF® Tactical Tourniquet-Wide (SOFTTW) was secured mid-thigh by 20 appliers blinded to pressure data and around a thigh-sized ballistic gel cylinder by gravity and 23.06kg. Pulling only outward (90° to strap entering buckle) achieved the lowest secured pressures on thighs and gel. For appliers, the best holding location was above the buckle, and the best strap-pulling direction was tangential to the thigh or gel (0° to strap entering buckle). Preceding tangential pulling with outward pulling resulted in higher secured pressures on the gel but did not aid appliers. Appliers generally did not reach secured pressures achievable for their strength. Of 80 thigh applications per tourniquet, 77 C-A-T7, 41 Tac RMT, 35 TMT, 16 Parabelt, and 10 SOFTTW applications had secured pressures greater than 100mmHg. The default for best tourniquet strap-application technique is to hold above the buckle and pull the strap tangential to the limb at the buckle. Additionally, neither strength nor experience guarantees desirable strap pressures in the absence of pressure knowledge.