Best Management Practices, Erosion, Residual Woody Biomass, and Soil Disturbances Within Biomass and Conventional Clearcut Harvests in Virginia’s Coastal Plain

Abstract

Abstract Forest residue utilization for energy has increased in the southeastern United States and additional increases are anticipated. However, such removals generate concerns regarding potential accelerated erosion and nutrient drains, which could affect site productivity and stream water quality. To address erosion and water quality concerns, postharvest erosion rates, operational feature areas, best management practice (BMP) implementation, residual ground cover, soil disturbance, and forest residue concentrations were evaluated on ten biomass and ten conventional clearcut harvests in Virginia’s Coastal Plain. No significant differences in erosion rates (P = 0.4727) were observed between biomass (0.71 tons ac-1 yr-1) and conventional (0.61 tons ac-1 yr-1) harvests. BMP compliance percentages were similar (P = 0.6776) for both biomass (88.54%) and conventional (90.99%) harvests. BMP implementation scores were determined to be a significant predictor of erosion rates (P < 0.0001). A significant reduction (28%) in postharvest residue concentrations was observed for biomass (10.22 tons ac-1) versus conventional harvests (14.24 tons ac-1) (P = 0.0173). Scores for BMP implementation and erosion rates were not significantly different between treatments, indicating that sufficient residual biomass exists for appropriate implementation of BMPs. BMPs provided similar erosion protection on both biomass and conventional clearcut harvests. Study Implications: Forest residues are widely used to cover and stabilize bare soil as best management practices (BMPs) for erosion control. The expanding bioenergy market has raised concerns that overutilization of forest residues may occur. Comparisons of biomass and conventional harvests in the Coastal Plain of Virginia revealed few significant postharvest differences. Implementation of existing water quality BMPs is important for minimizing erosion on biomass harvests; however, the development of biomass harvesting guidelines in addition to current state BMPs appears unnecessary under current harvesting practices. Harvest residue management should be conducted to ensure adequate supplies of woody debris remain for site protection.