Abstract
In this study, we investigated the impact of benzophenone (BP), a small molecule additive, on the performance and stability of inverted perovskite solar cells (PSCs). Specifically, we introduced BP into the perovskite precursor solution of FAPbI3 to fabricate PSCs with an ITO/PEDOT:PSS/BP:FAPbI3/PCBM/C60/PCB/Ag architecture. The incorporation of BP with an optimum concentration of 2 mg mL-1 significantly enhanced the power conversion efficiency (PCE) of the inverted PSC from 13.12 to 18.84% with negligible hysteresis. Notably, the BP-based PSCs retained ∼90% of their initial PCE after being stored in ambient air with 30% relative humidity at 25 °C for 700 h. In contrast, control devices showed rapid degradation, retaining only 30% of their initial value within 300 h under the same conditions. We attributed the superior performance and stability of the BP-based PSCs to the grain boundary passivation of the perovskite film. The improvement was mainly attributed to the intermolecular interaction between the O-donor Lewis base BP material and both Pb2+ and FA+ in FAPbI3. This effectively suppresses trap-assisted recombination and promotes the conversion of the δ-phase to photoactive and stable α-phase FAPbI3. Overall, our findings suggest that BP is a promising additive for improving the performance and stability of inverted PSCs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.