Bentonite as an active natural filler for silicone leading to piezoelectric-like response material

Abstract

Listen

Translate article

Raw sodium bentonite (Bent) without preliminary treatments is incorporated as a filler in a silicone matrix, from 5 to 100 parts per hundred (pph), by weight, by simple mixing in solution. The mixtures are processed as films and stabilized by condensation crosslinking at room temperature. Besides being environmentally safe and non-toxic, bentonite is 30 times cheaper than polydimethylsiloxane (PDMS), so the cost price of composites can be reduced by over 40%. Studies on the effects of bentonite addition as filler on the properties of composites reveal that thermal stability is not significantly affected, while an increase in the amount of inorganic residue with an increase of Bent content is recorded. More importantly, the mechanical and dielectric properties are significantly influenced by the Bent content in the PDMS matrix. The Young's modulus increases, while the elongation decreases, indicating a stiffening of the material and a decrease in its elasticity as the Bent load increases. Most notably, the dielectric permittivity increases up to more than five times at 103 Hz by adding 100 pph Bent, while the dielectric losses remain acceptable, especially at high frequencies for all composites. Furthermore, the study of composite films through Piezoresponse Force Microscopy and piezoelectric testing system reveals an outstanding piezoelectric-like response for composites with a high Bent content. The wide-angle X-ray diffraction indicates an increase of the crystalline fraction - the main factor that influences the apparent piezoelectric coefficient - with increasing the Bent load.