Benefit of 3D Vena Contracta Area over 2D-Based Echocardiographic Methods in Quantification of Functional Mitral Valve Regurgitation

Abstract

The two-dimensional proximal isovelocity surface area (2D PISA) method in the quantification of an effective regurgitation orifice area (EROA) has limitations in functional mitral valve regurgitation (FMR), particularly in non-circular coaptation defects. We aimed to validate a three-dimensional vena contracta area (3D VCA) against a conventional EROA using a 2D PISA method and anatomic regurgitation orifice area (AROA) in patients with FMR. Both 2D and 3D full-volume color Doppler data were acquired during consecutive transoesophageal echocardiography (TEE) examinations. The EROA 2D PISA was calculated as recommended by current guidelines. Multiplanar reconstruction was used for offline analysis of the 3D VCA (with a color Doppler) and AROA (without a color Doppler). Receiver operating characteristic (ROC) analysis was used to calculate a cut-off value for the 3D VCA to discriminate between moderate and severe FMR as classified by the EROA 2D PISA. From 2015 to 2018, 105 consecutive patients with complete and adequate imaging data were included. The 3D VCA correlated strongly with the 2D PISA EROA and AROA (r = 0.93 and 0.94). In the presence of eccentric or multiple regurgitant jets, there was no significant difference in correlations with the 3D VCA. We found a 3D VCA cut-off of 0.43 cm2 to discriminate between moderate and severe FMR (area under curve = 0.98). The 3D VCA showed a higher interobserver agreement than the EROA 2D PISA (interclass correlation coefficient: 0.94 vs. 0.81). The 3D VCA has excellent validity and lower variability than the conventional 2D PISA in FMR. Compared to the 2D PISA, the 3D VCA was not affected by the presence of eccentric or multiple regurgitation jets or non-circular regurgitation orifices. With a threshold of 0.43 cm2 for the 3D VCA, we demonstrated reliable discrimination between moderate and severe FMR.