Abstract

In the past, it was more economical to dispose fine coal without utilization. Nowadays, beneficiation of fine coal is a necessity due to increasing costs of mining, tailings disposal and storage problems. This research contains experimental studies devoted to beneficiation of <0.1 mm coal preparation plant tailings of Garp Lignite Enterprises (Tunçbilek- Kütahya/Turkey). It was found from the characterization studies that the coal tailings include clay minerals (kaolinite, mica/illite, and smectite group), quartz, siderite, pyrite and dolomite which are of higher density than lignite coal. Concentration processes are proposed as preliminary and final processing. In the preliminary two-stage processing tests, hydrocyclone is used to separate clay minerals associated with coal. For this purpose, structural and operating parameters of hydrocyclone (hydrocyclone diameter, vortex diameter, apex diameter, feed inlet pressure, pulp solids ratio) and of Falcon concentrator (gravity force, feed rate, pulp solid ratio and wash water pressure) are optimized, and their influences on separation efficiency were discussed. Under optimum opened flowsheet, the fine clean coal concentrate assay was 35.66% ash and 1.63% total sulfur at a recovery of 34.60%.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call