Abstract
Residual soils are found all around the world. Their behaviour is different from ‘classic’ soils due to the structure resulting from the geological formation processes, which can eventually undergo degradation under static and cyclic loads, with a decrease in both stiffness and strength. In this context, the aim of the present study was to evaluate the behaviour of weakly bonded residual soil in the face of loading and unloading cycles using field plate load tests. Preliminary field and laboratory tests were carried out to characterise the residual soil at the experimental site. Monotonic and cyclic plate load tests – with circular and square plates – were performed under three different load amplitudes. The results showed no shape effect of the loaded area for both monotonic and cyclic loading, considering the same loading pattern. Also, there is a threshold load, which indicates a yielding point and a change in soil behaviour and can be estimated from simple laboratory tests. Below this load, the residual soil presented a rigid behaviour even when subjected to cyclic loads.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.