Behaviour and design of coupled steel-concrete composite wall-frame structures

Abstract

This paper explores the lateral load-carrying behaviour of coupled steel-concrete composite (SCC) wall-frame structures, which comprise concrete-filled steel tubular (CFST) columns, composite beams and composite walls. Both experimental and numerical studies were conducted. The experimental programme includes one single-storey bare frame structure and three single-storey coupled SCC wall-frame structures. The experimental results showed that applying the composite wall can significantly increase the lateral load-carrying capacity of the entire structure. It was also evident that increasing the wall width and lowering the structural height can effectively enhance the lateral load-carrying capacity. The modelling approaches in ABAQUS and OpenSees were proposed to conduct the finite element (FE) analysis. In particular, ABAQUS was used to build single-storey coupled SCC wall-frame structures to assess the effects of several parameters, such as beam stiffness, the thickness of steel tubes and wall faceplates, wall width, concrete grade, steel grade and axial load ratio. It was found that increasing the thickness of steel tubes and wall faceplates as well as wall width can effectively increase the lateral performance of the structure but increasing the steel beam stiffness only results in limited improvement. Increasing the steel grade can improve the lateral performance of the structure much more significantly than the concrete grade. When the axial load ratio reaches 0.6, the lateral strength of the structure is greatly reduced owing to the P-Δ effect. Moreover, one multi-storey bare frame structure and three multi-storey coupled SCC wall-frame structures were constructed in OpenSees as a case study. The multi-storey coupled SCC wall-frame structures display extraordinary lateral load-carrying capacity by analysing the curves of base shear force versus roof drift ratio. Besides that, instead of the nominal inter-storey drift ratio, the destructive inter-storey drift ratio together with the roof drift ratio are recommended to assess the multi-storey coupled SCC wall-frame structures in order to avoid overconservative design.