Behavior of Composite Materials Under Impact: Strain Rate Effects, Damage, and Plasticity

Abstract

Abstract Composite materials are often subjected to low velocity impacts, ballistic impacts, or crash impacts. In order to analyze such events, realistic model of the material behavior must be used to capture phenomena no included in linear elastic models. Nonlinear behavior occurs when a unidirectional lamina is loaded in the transverse direction or in shear when the matrix material deforms plastically. The stiffness and strength of composite materials at high strain rates is often very different from what is measured in quasi-static tests. In addition, different types of damage are introduced during impart: matrix cracks, delaminations, fiber failures, fiber-matrix debonding. The introduction of this damage will affect the subsequent behavior of the material. Many different approaches have been taken to account for the effects of strain rate, plasticity and damage on the mechanical behavior of composite materials. The objective of this paper is to assess current knowledge in this area, review and compare models used to describe the stress-strain behavior and predict failure of such materials. Continuum mechanics approaches are used to describe the behavior of laminas with different types of damage, and to model the behavior of interfaces between plies. Phenomenological plasticity models account for the nonlinear effects under transverse and shear loads. Some of these models are shown to be similar even though they were derived by very different approaches. Many accurate analyses of composite structures under impact assume linear elastic behavior and do not considered the complicating effects discussed here. The applicability of the different models for material behavior is also discussed in terms of selecting an appropriate model for analyzing a particular impact.