Abstract
Large-scale agricultural machinery cooperatives require technical statistic report of agricultural machinery operations to improve the efficiency of fleet management. This research proposed a smartphone-based solution to build the behavior model for agricultural machinery operations by using the embedded sensors including the GNSS, the accelerometer, and the microphone. The whole working process of agricultural machinery operation was divided into four stages: preparation, operation, U-turn, and transfer, each of which may contain the behaviors of stalling and idling. Field experiments were carried out by skilled operators, whose operations were typical agricultural machinery operations that could be used to extract behavior features. Butterworth low-pass filter was used to smooth the output from the accelerometer. Then, the operating data were collected through an APP when sowing the forage maize as a case study. Four stages of machinery operation can be preliminarily classified by using GNSS speed, while the identification of behaviors such as sudden acceleration and longtime idling that may increase fuel consumption, reduce machinery life, or decrease the working efficiency, requires extra information such as acceleration and sound intensity. The results showed that the jerk of accelerating can describe the severity of the sudden acceleration, the standard deviation of forward acceleration can reflect the smoothness of operation, the upward acceleration can be used to identify behaviors of stalling and idling, and the sound intensity during idling can capture the behavior of goosing the throttle. Further, the operating behavior figure can be drawn based on the above parameters. In conclusion, this research constructed several behavior models of agricultural machinery and operators by using smartphone’s sensor data and established the base of the online assessing and scoring system for agricultural machinery operations. Keywords: agricultural machinery operation, behavior modeling, smartphone, sensors, case study, forage maize DOI: 10.25165/j.ijabe.20191206.4702 Citation: Wu C C, Chen Z B, Wang D X, Kou Z H, Cai Y P, Yang W Z. Behavior modelling and sensing for machinery operations using smartphone’s sensor data: a case study of forage maize sowing. Int J Agric & Biol Eng, 2019; 12(6): 66–74.
Highlights
Machinery cooperatives are the main carriers of agricultural machinery socialization service in China[1,2,3]
Large-scale cooperatives usually employ dozens of operators that lead to more complicated management relations than family farms
The main reason is that GNSS based telematics terminals cannot capture the transient data of operating behaviors during operation[11,12]
Summary
Machinery cooperatives are the main carriers of agricultural machinery socialization service in China[1,2,3]. GNSS[4,5,6] and ISOBUS[7,8] based fleet management are widely used and can realize real-time visibility of vehicle location, status, and diagnostics. It cannot record subtle but important operating behaviors[9], such as longtime stalling or idling, sudden acceleration, sharp turning, and etc.[10]. Extra information from external sensors are required to detect those subtle but important operating information of agricultural machinery
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Agricultural and Biological Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
