Bearing Non-Uniform Loading Condition Monitoring Based on Dual-Channel Fusion Improved DenseNet Network

Abstract

Misalignment or unbalanced loading of machine tool spindle bearings often results in skewed bearing operation, which makes the spindle more susceptible to failure. In addition, due to the weak impact signal of the bearing in skewed operation, a single feature information cannot accurately characterize the operation status of the bearing. To address the above problems, this paper proposes a method to monitor the uneven running state of bearing load based on a dual-channel fusion improved dense connection (DenseNet) network. First, the original signal is pre-processed by overlapping sampling method, and the dual-channel experimental data are obtained by frequency-domain and time-frequency-domain algorithms; then the processed data are input into the improved 1D-DenseNet and 2D-DenseNet models respectively for feature extraction; then the frequency-domain and time-frequency-domain features are fused by concat splicing operation, and the output belongs to each category The probability distribution is used to characterize the operating state of the bearings. Finally, the validity of the algorithm model is verified by using the Case Western Reserve University public rolling bearing data set, and an experimental bench is designed and built for experimental verification of the uneven bearing load operation. The comparative analysis of the experimental results in this paper shows that the algorithm can extract the features of the input signal more comprehensively and finally achieve 100% recognition accuracy.