Abstract
Rolling element bearing fault diagnostics has been a topic of intensive research in recent decades, as they are critical components of rotating machinery and therefore their failure may result in sudden breakdown of machines and industrial installations. The early and accurate detection of incipient faults on bearings can reduce the production cost by allowing maintenance engineers to schedule a replacement at the most convenient time. Envelope Analysis is a widespread powerful method in bearing diagnostics, often used along with Fast Kurtogram. However, the presence of ElectroMagnetic Interference (EMI) and generally speaking of impulsive and non gaussian noise, increases the complexity of bearing fault diagnosis and may lead to rather poor diagnostic performance. EMI is often present in mechanisms and machines, where motors are controlled by Variable-Frequency Drives (VFD) and can present a vibration signature similar to that of bearing faults. Therefore, the main aim of this paper is the proposal of advanced signal processing techniques, which can detect bearing faults under the presence of strong ElectroMagnetic Interference or other impulsive noise (where state of the art methods fail). Two novel diagnostic methodologies are proposed based on the Cyclic Spectral Coherence (CSCoh). The integration of the CSCoh, over the full spectral frequency axis or over a specific spectral frequency band, results respectively in the Enhanced Envelope Spectrum or in the Improved Envelope Spectrum. The two novel diagnostic methodologies allow for the automatic selection and integration of the optimal bands on the CSCoh under heavy impulsive noise, such as EMI, resulting in a spectrum with enhanced characteristic bearing fault frequencies, without any human intervention required besides the knowledge of the characteristic fault frequency which is under investigation. The methods are applied on vibration data, captured on an epicyclic gearbox with seeded bearing faults, operating under the influence of strong EMI. The methods are tested and evaluated on different fault cases and achieve improved performance compared to state of the art diagnostic methodologies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.