Abstract
Geocell reinforcement (GR) improves load-deformation behavior of shallow foundations. A series of instrumented large-scale plate load tests was performed to ascertain such improvements and to correlate that to the relative density (Dr ) of geocell-reinforced sand (GRS). Variable effects on stiffness, bearing capacity (BC), load dispersion and strain-stress behaviors are discussed. The extensive tests made it possible to arrive at a simplified analytical procedure for predicting the BC of circular footings on GRS, taking into account probable shear failure mechanisms and monitored GR deformation. These results allowed the validation and generalization of the procedure reduced from an equivalent-layer BC model considering ‘confinement’ and ‘stress dispersion’ effects on the failure mechanism. Load dispersion angle and strains increase with increasing the sand Dr resulted in significant stress reduction below the GR. This was found most beneficial for the higher densities ranges. The proposed analytical approach can confidently be used for practical design purposes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: European Journal of Environmental and Civil Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.