Abstract

Inductively coupled plasma (ICP) etching of GaSb, AlGaAsSb, and InGaAsSb using /Ar plasma discharges was investigated for the fabrication of GaInAsSb/AlGaAsSb/GaSb laser diodes. Etching rates and selectivity were characterized as functions of gas flow ratio, accelerating voltage, and ICP source power, and the etching mechanism was discussed in detail. It is observed that the etch rate of GaSb and AlGaAsSb is much higher than that of InGaAsSb. The etched surfaces of GaSb, AlGaAsSb all have comparable root-mean-square roughness to the unetched samples over a wide range of plasma conditions; however, it is much rougher in etching of InGaAsSb. The selectivity between GaSb and AlGaAsSb was close to unity over the entire range of plasma conditions investigated, which is desirable for the fabrication of quaternary antimonide laser diodes.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.