Batik Industrial Waste Monitoring and Control System Based on The Internet of Things

Abstract

The aims of this research are to (1) Design and build a Batik Industrial Waste Monitoring and Control System Based on the Internet of Things (BIWMCS -IoT); (2) Test the performance of the BIWMCS-IoT system. The design and implementation of the BIWMCS-IoT system consist of five stages, namely: (1) Needs analysis, (2) Design, consisting of electronic planning, hardware, and software; (3) Development, including hardware and software development; (4) Testing, and (5) implementation. The BIWMCS-IoT system consists of a sensor unit to measure the parameters of water turbidity, temperature, Power of Hydrogen (pH), and the flow velocity of the wastewater then obtained by the microcontroller and the results are sent to the Wi-Fi module to adjust the solenoid valve opening and closing. Based on the testing of the system, has been shown that the BIWMCS-IoT system can work well according to the standards in the Minister of Indonesian Environment Regulation Number 05 of 2014. The reading accuracy of the batik waste monitoring system reaches 96.6% with the delivery time to the smartphone less than 30 seconds. This shows that this system can work well to monitor and control the liquid waste produced by the batik industry.