Batch adsorption study of Congo Red dye using unmodified Azadirachta indica leaves: isotherms and kinetics

Abstract

Abstract A low-cost adsorbent developed from unmodified Azadirachta indica leaves was used for adsorptive removal of the Congo Red dye from an aqueous medium. The adsorbent was characterized by the Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM) techniques. For optimization of operational parameters such as dye concentration, solution pH, adsorbent dose, contact time, and temperature, batch adsorption experiments were performed. It was found that for neem leaves powder (NLP), the optimum conditions were as follows: adsorbent dose of 0.8 g, contact time of 100 min having a solution with pH value of 5, adsorbate initial concentration of 40 ppm at temperature 60 °C where maximum amount of dye, i.e., 84%, removal was observed. The process followed pseudo-first-order kinetics, which reveals physical adsorption. According to isothermal investigations, sorption data were best fit with the Freundlich isotherm model. Thermodynamically, the adsorption of the Congo Red dye by the neem leaf powder was exothermic. Furthermore, the mechanistic removal of the Congo Red dye by the NLP has been explored with the help of the surface complex formation (PHREEQC) mechanism. Overall, the results of the study explore the promising nature of NLP for Congo Red dye removal.