Abstract
Abstract An important problem in the operation of gas pipelines is the identification of accidental gas leakage from the damaged pipeline. It is the hardest when the leakage is small. A disadvantage of prior methods is that with their use is only possible to identify and locate significant outflow with only a low accuracy. In proposed method of identifying the gas flow will be used a new signal from the corrective element “r” attached to the tested pipeline and calculated from it and mass flow rate signals auto and cross power spectral density Sxx, Syy, Srr, Sxy, Sxr, Syr. Using the power spectral density signals allows for transition from the signal diagnostic to the parameter diagnostic which is more effective. Assumptions methods will be verified at the experimental station.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.