Basicity‐based screening of aniline derivative for composite proton exchange membranes

Abstract

ABSTRACTThe aim of this study was to find a suitable aniline derivative to develop composite sulfonated poly(ether ether ketone) (SPEEK) membranes and detail evaluation of their physico‐ and electrochemical properties. The hypothesis was high basicity of the aniline derivatives could form good composite membranes with better physicochemical and electrochemical properties. To assess the basicity we measured the zeta potentials of the polymers and correlated them with ion‐exchange capacities, water uptakes, transport numbers, water‐diffusion coefficients, conductivities, and methanol permeabilities. The obtained values of zeta potentials at pH 7 were 6.52, −14.66, −25.17, and −28 for SPEEK/polynaphthalene (PNAPH), SPEEK/polyanisidine (PANIS), SPEEK/polyaniline (PANI), and SPEEK/polyxylindine (PXYL), respectively supports the hypothesis and strongly suggests polyaniline derivative's basicity‐dependent properties. Of the four derivatives (PNAPH, PANIS, PANI, and PXYL), the SPEEK/PXYL composite membrane had the lowest methanol permeability of 1 × 10−4 cm2/s and highest proton conductivity of 161 mS/cm. These values are far better than the neat SPEEK and SPEEK/PANI composite. The suitability of SPEEK/PXYL can be explained by the high basicity of the PXYL composite membrane, which leads to the formation of effective Debye spheres, meaning that the ionic complex can interact with surrounding hydronium ions and form hydrophilic channels resulting in high proton conductivity and low methanol permeability. These results suggest that SPEEK/PXYL is a highly suitable membrane for methanol fuel cells or other electrochemical applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 43978.