Abstract
The aim of the present study is to fabricate bone cement that could transform to carbonate apatite (CO3Ap) completely at body temperature. The powder phase of vaterite and dicalcium phosphate anhydrous (DCPA) was mixed with 0.8 mol/L of NaH2PO4, Na2HPO4, and Na3PO4 aqueous solution, respectively, with liquid to powder ratio (L/P ratio) of 0.45, 0.55, and 0.65. The paste was packed into split stainless steel mold, covered with the glass slide and kept at 37°C and 100% relative humidity for up to 96 hours (h). XRD analysis revealed that the cement became pure CO3Ap within 24 h for Na3PO4, 72 h for Na2HPO4, and 96 h for NaH2PO4, respectively. FT-IR results showed that all of the obtained specimens could be assigned to B-type CO3Ap. CHN analysis showed the carbonate content of the specimen were 10.4 ± 0.3% for NaH2PO4, 11.3 ± 0.7% for Na2HPO4, and 11.8 ± 0.4% for Na3PO4, respectively. Diametral tensile strength of the set CO3Ap cement was 1.95 ± 0.42 MPa for NaH2PO4, 2.53 ± 0.53 MPa for Na2HPO4, and 3.45 ± 1.53 MPa for Na3PO4, respectively. The set CO3Ap cement had low crystallinity similar to bone apatite since it was synthesized at body temperature. We concluded, therefore, that CO3Ap cement prepared from the present method has higher possibility to be used as an ideal bone replacement.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
