Basic investigations on a piezoelectric bending actuator for micro-electro-mechanical applications

Abstract

This article deals with basic investigations into the development and manufacturing process of a piezoelectric animated micro actuator. The concept of the fabrication of a piezoelectric microactuator will be introduced and first fundamental investigations on materials characterization and process technology for the Pt bottom electrode and piezoelectric PZT layer will be presented. PZT thin film have been deposited with the chemical solution deposition (CSD) technique and have been characterized with dielectric and ferroelectric measurements. For optimization of actuator properties an analytical approach and a simulation with finite element method was carried out. This shows that the cantilever must have a length above 300 μm to reach a tip deflection higher than 10 μm at voltages comparable to those used in integrated circuits (IC). Additionally, stress measurements of each layer have been used to characterize the films mechanically.