Abstract
This paper describes basic characteristics of the quartz crystal sensor with interdigitated electrodes (IDE quartz crystal sensor) which is for simultaneous monitoring of mass, viscosity, conductivity and dielectric changes of liquids or thin films. As the IDE quartz crystal sensor has three terminals for a pair of IDEs on the one side and a counter electrode on the other side, the resonance properties have been analyzed using the electrical equivalent circuit models and measured experimentally for all connecting types of electrode pairs. The IDE quartz crystal has shown clear resonance curves for calculating the resonance frequency and resonance resistance values as well as normal quartz crystal in the air and in contact with liquid. Small shifts in the resonance frequency and resonance resistance depending on the connecting types have been obtained and analyzed using the equivalent circuit models. We have found the integrated quartz crystal and IDE sensors could be monitored simultaneously by only one impedance analyzer. Finally, two types of measuring systems have been demonstrated for continuous measuring methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.