Band-to-band registration and ortho-rectification of multilens/multispectral imagery: A case study of MiniMCA-12 acquired by a fixed-wing UAS

Abstract

MiniMCA (Miniature Multiple Camera Array) is a lightweight, frame-based, and multilens composed multispectral sensor, which is suitable to mount on an unmanned aerial systems (UAS) to acquire high spatial and temporal resolution imagery for various remote sensing applications. Since MiniMCA has significant band misregistration effect, an automatic and precise band-to-band registration (BBR) method is proposed in this study. Based on the principle of sensor plane-to-plane projection, a modified projective transformation (MPT) model is developed. It is to estimate all coefficients of MPT from indoor camera calibration, together with two systematic errors correction. Therefore, we can transfer all bands into the same image space. Quantitative error analysis shows that the proposed BBR scheme is scene independent and can achieve 0.33 pixels of accuracy, which demonstrating the proposed method is accurate and reliable. Meanwhile, it is difficult to mark ground control points (GCPs) on the MiniMCA images, as its spatial resolution is low when the flight height is higher than 400m. In this study, a higher resolution RGB camera is adopted to produce digital surface model (DSM) and assist MiniMCA ortho-image generation. After precise BBR, only one reference band of MiniMCA image is necessary for aerial triangulation because all bands have same exterior and interior orientation parameters. It means that all the MiniMCA imagery can be ortho-rectified through the same exterior and interior orientation parameters of the reference band. The result of the proposed ortho-rectification procedure shows the co-registration errors between MiniMCA reference band and the RGB ortho-images is less than 0.6 pixels.