Abstract
The combined effects of yarn tensile strength, inter-yarn friction, projectile impact location, and fabric clamping conditions on the probabilistic impact response of flexible woven Kevlar KM2 fabrics are studied using a 0.22caliber spherical projectile. The statistical nature of yarn tensile strength is accounted for by mapping Weibull strength distributions onto the individual yarns of the fabric model. Variability in projectile impact location relative to the yarns at the impact site is accounted for by randomly selecting one of 25 predetermined impact locations around a warp-fill yarn cross-over location at the center of the fabric. Five different inter-yarn friction levels are deterministically implemented, ranging from 0.0 to 0.4. Two boundary conditions are considered, 4-sided clamped and 2-sided clamped. Forty impact simulations are used to generate a probabilistic impact response (PVR) curve for each test case, describing the probability of fabric penetration as a function of projectile impact velocity. The fabric V50 velocity and impact performance variability were observed to decrease with increasing inter-yarn friction levels for the 4-sided clamped cases, while they increased for the 2-sided clamped cases.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.